Skip to content

Resources

How to work out the lumens a screen needs, choose a lens from throw distance, and decide when to stack or blend.

Updated:

Projector choice comes down to three questions: how bright must the image be, where can the projector stand, and how many pixels does the content need.

From lumens to image brightness

Lumens describe the light leaving the projector. What the audience sees is that light spread over the screen. For a matte screen the image luminance in nits is approximately: lumens × screen gain ÷ (3.14 × screen area in m²).

Example: 20,000 lumens on a 6 × 3.375 m screen (20.25 m², gain 1.0) gives about 314 nits. The same projector on a 10 × 5.6 m screen gives about 113 nits. Doubling the screen width quarters the brightness.

  • Darkened room, no stage wash on the screen: an image can work from roughly 100 nits upward.
  • Conference with house lights partly up and stage lighting nearby: plan for several hundred nits.
  • Daylight or strong ambient light: projection is rarely the right tool; consider LED.

These are planning figures. Stray light on the screen reduces contrast faster than it reduces brightness, so controlling stage wash and house lights is often worth more than extra lumens.

Throw ratio and lenses

Throw ratio is distance to the screen divided by image width. A projector 12 m from a 6 m wide image needs a lens that covers 2.0. Large-venue projectors take interchangeable lenses, so send the distance you actually have, including rear-projection depth if the projector sits behind the screen. Lens shift lets the projector sit off-centre without keystone correction; digital keystone costs resolution.

Stacking and blending

  • Stacking two projectors on one image doubles the light and gives redundancy if one fails.
  • Blending places projectors side by side with an overlap, commonly 15 to 25 percent of each image, to build a wide screen. Content must be made at the blended canvas size.
  • Both need time for alignment on site. Put it in the schedule.

Resolution and source

Match the projector's native resolution and aspect ratio to the content: WUXGA (1920 × 1200) suits 16:10 and 16:9 presentations; 4K matters for large screens viewed up close and for fine text. Laser-phosphor light sources hold their brightness over long shows and can be mounted in any orientation, which matters for mapping.

What to send for a quote

Screen width and height, front or rear projection, available throw distance, expected ambient light, content resolution, and whether the image is a single screen, a blend or a mapped surface.

← All resources